Firepit

Obtaining

Firepits are created in-world by dropping one of any log and three sticks into the same block space, then using a firestarter item or other fire starting (need page of firelighting items) item on the block below to create it! Adding up to five kindling will improve the chance of the fire lighting. Each kindling adds 10% to the chance of the firepit starting for a max of 50% with five items.

Note: firestarters may take multiple tries to light the fire!

Firepits need to be shielded from the weather or they will stop consuming fuel and eventually burn out. Placing a block above them will protect the firepit.

If your firepit runs out of fuel or the weather has extingusihed it you will need to relight it, doing so requires one piece of fuel in the firepit and using the firestarter item or other fire starting item. (needs firelighting page)

Usage

Firepits are used for making torches, cooking food, heating up low-tier items for smithing, and cooking sand to make glass. Firepits also provide a heat source for wrought iron grills. Note: Firepits cannot be used to smelt ore.

GUI

File:Firepit GUI.png

Fuel Input Slot - Input slot for logs and peat. Fuel placed in this slot will move down to the storage slots if they are empty. Fuel Storage Slots - Storage slots for fuel. Fuel is always consumed from the bottom slot, and fuel located in other slots will move down if the lower slots are empty. Temperature Gauge - An estimate of the current temperature of the firepit. Heating Slot - Input slot for heating items. This slot has a stack-size limit of a single item. Output Slots - Output slots for torches, glass, and molten metal. Ceramic molds must be placed in these slots to catch molten metal.

Heating Items

Firepits will gradually heat items in the heating and output slots as long as it is burning fuel. Metal items that reach their melting temperature will combine with any empty or partially-filled ceramic molds of the same metal type in the output slots. If there are no ceramic ingot molds in the output slots, the melting metal will be destroyed.

Fuel

Items in a firepit can only get as hot as the current burning temperature of the fuel. A bellows can be used to increase the current burning temperature of the fuel, and heat the firepit twice as fast at the expense of consuming the fuel twice as fast. Note: Bellows only affects how quickly the firepit itself heats up. Items heating up inside of the the firepit will heat up at the same rate regardless of if a bellows is used or not.

When the firepit runs out of fuel, or when it is exposed to precipitation, the items in the heating and output slots will start to cool down, and the firepit will eventually turn off.

Legend:	Without Bellows	With Bellows

Log	Dark Red					Bright Red					Orange					Yellow					Yellow White
		.	:	:.	::		.	:	:.	::		.	:	:.	::		.	:	:.	::		.	:	:.	::
Acacia
Ash
Aspen
Birch
Chestnut
Douglas Fir
Hickory
Kapok
Maple
Oak
Peat
Pine
Sequoia
Spruce
Sycamore
White Cedar
White Elm
Willow

Trivia

• In addition to placing fuel in the fuel input slot, it is also possible to add fuel to a firepit by simply dropping the fuel on the block. This way a player can drop an entire stack of fuel on the firepit, which will slowly be consumed permitted the items haven't been sitting on the block long enough to despawn.

Configuration

Main article: Configuration

Option	Default Value	Description
time		Options related to time.
tempDecreaseMultiplier	1.0	This is a global multiplier for the rate at which items cool down. Increase to make items cool down faster.
tempIncreaseMultiplier	1.0	This is a global multiplier for the rate at which items heat up. Increase to make items heat up faster.

History

Build #79
	Peat can now be used as a fire pit fuel.

See Also

• Forge

foot