Difference between revisions of "Blast Furnace"

From TFC:TNG
Jump to navigation Jump to search
(→‎Construction: Clarify that the capacity is determined by the chimney height, not the total height, and explain the relationship between the two)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
{{ToDo|fix everything}}
+
{{SideInfoBox Object
 +
| title = Blast Furnace
 +
| largeimage1 = {{BlockImage|Blast Furnace}}
 +
| invimage1 = Blast Furnace
 +
| tool = pickaxe
 +
| stacksize = 32
 +
| size = Small
 +
| weight = Light
 +
| renewable = No
 +
| oredict = None
 +
| gravity =
 +
| drops = Self
 +
| flammable =
 +
| luminance =
 +
| blastresistance =
 +
}}
  
 
==Overview==
 
==Overview==
  
−
The Blast Furnace is used to smelt [[Iron]] [[Ore]] into liquid [[Pig Iron]]. Pig Iron ingots can be worked into [[Steel]].
+
The Blast Furnace is used to smelt [[Ores & Minerals#Ore Generation|Iron Ore]] into liquid [[Pig Iron]]. Pig Iron ingots are worked into [[Steel]].
  
 
==Obtaining==
 
==Obtaining==
  
−
The Blast Furnace is made from eight [[Wrought Iron]] [[Double Sheet]]s and a [[Crucible]].
+
===Blast Furnace Shopping List===
 +
 
 +
====Minimum Size:====
 +
 
 +
*4 [[Fire Bricks]]
 +
*28 [[Wrought Iron]] [[Sheet|Sheets]]
 +
*A [[Double Sheet]] of any Tool [[Metals|Metal]]
 +
*2 [[Crucible|Crucibles]]
 +
*1 [[Bellows]] (2 recommended for improved blowing)
  
−
===Construction===
+
====For Each Additional Layer:====
  
−
The height of the Blast Furnace determines how much ore, flux and charcoal it can hold, and thus the maximum amount of ore which can be smelted at one time. The smallest Blast Furnace possible has a 1 block high chimney and requires a minimum of 4 [[Fire Clay|fire brick blocks]] and 12 wrought iron [[Metal Sheet|metal sheets]] to build. The largest Blast Furnace possible has a 5 block high chimney, and requires a minimum of 20 [[Fire Clay|fire brick blocks]] and 60 wrought iron [[Metal Sheet|metal sheets]] to build.
+
*4 Fire Bricks
 +
*12 Wrought Iron Sheets
  
−
A minimal size Blast Furnace is constructed as follows:
+
[[File:Minimum Blast Furnace.png|thumb|400x400px|A minimum blast furnace construction]]
  
−
*'''The [[Fire Clay|Fire Bricks]]''': Two blocks above the ground, construct a "tube" by surrounding the center air block on all four sides.
+
===Crafting Requirements===
−
*'''The [[Metal Sheet]]s''': Place wrought iron or higher tier [[Metals#Tool Metals|tool-metal]] metal sheets around the sides of the chimney. ''Note: Sheets do not need to be placed on the top or bottom.''
 
−
*'''The [[Crucible]]''': Place the crucible on the ground below the center air block.
 
−
*'''The Blast Furnace Block''': Place the Blast Furnace Block between the chimney and the crucible underneath the center air block.
 
−
*'''The [[Bellows]]''': Place the Bellows on the side of the Blast Furnace Block, making sure the side with the hole is facing the Blast Furnace.
 
−
*'''Finalization:''': Place a Tuyere inside the Blast Furnace.
 
−
*'''Expansion''': Blast Furnaces may expand their total storage capacity by adding up to four additional layers to the existing construction. To expand a Blast Furnace, simply add an additional layer to the chimney.
 
  
−
===Making the Tuyere===
+
*Craft the Blast Furnace block out of eight Wrought Iron Double Sheets and a Crucible.
 +
*Work a [[Tuyere]] out of a Double Sheet.
  
−
Tuyeres can only be made from [[Metals#Tool Metals|tool metals]], by working a [[Metal Double Sheet]] on an anvil after selecting the Tuyere on the plan selection button.
+
===Construction===
 +
The height of the blast furnace’s chimney determines how much [[Ores & Minerals|Ore]], [[Flux]] and [[Charcoal]] it can hold, and thus the maximum amount of ore which can be smelted at one time. Each layer of chimney holds four of each item. The maximum height is five layers of chimney, holding 20 ore, 20 flux, and 20 charcoal.
  
−
{{Grid/Anvil
+
#Place the Crucible on the ground
−
|A1= Copper Double Sheet;  |B1= ; Copper Tuyere|C1= Copper Tuyere
+
#Place the Blast Furnace Block on top of the Crucible
−
|Tool= Stone Hammer
+
#Place a Bellows such that it will blow into the Blast Furnace Block.
−
}}
+
#Form the Chimney out of Fire Bricks starting the block above the Blast Furnace Block.
 +
#{{Key|rmb}}to place 12 Wrought Iron Sheets on each horizontal, outward-facing side of the Blast Furnace.
 +
#Place the Tuyere inside the Blast Furnace GUI.
 +
#Add additional layers as wanted.
  
 
==Usage==
 
==Usage==
  
−
The finalized Blast Furnace fills when charcoal, flux and ore is dropped into the chimney. Right click the blast furnace block with a [[Firestarter]] or a [[Construction#Flint & Steel|Flint & Steel]] to activate it. The front of the blast furnace block and the top of the chimney should both start to glow.
+
The finalized Blast Furnace fills when charcoal, flux and ore is dropped into the chimney. Right click the blast furnace block with a [[Firestarter]] or a [[Flint & Steel]] to activate it. The front of the blast furnace block and the top of the chimney should both start to glow.
−
 
 
−
{| class="wikitable"
 
−
|-
 
−
!
 
−
!Empty Blast Furnace
 
−
!Inactive Blast Furnace
 
−
!Active Blast Furnace
 
−
|-
 
−
|Top View
 
−
| align="center" |[[File:BFtopinactive.png]]
 
−
| align="center" |[[File:Bloomerytopfull.png]]
 
−
| align="center" |[[File:Bloomerytopactive.png]]
 
−
|}
 
  
 
===GUI===
 
===GUI===
Line 53: Line 63:
 
The Blast Furnace GUI can be opened by right clicking the Blast Furnace block.
 
The Blast Furnace GUI can be opened by right clicking the Blast Furnace block.
  
−
<br />
+
[[File:Blast Furnace GUI.png|frameless|400x400px]]
  
 
*Temperature Gauge: This shows the current temperature of the Blast Furnace. The temperature can be raised by adding more coal or by attaching a [[bellows]] to either side of the Blast Furnace and pumping it.
 
*Temperature Gauge: This shows the current temperature of the Blast Furnace. The temperature can be raised by adding more coal or by attaching a [[bellows]] to either side of the Blast Furnace and pumping it.
Line 60: Line 70:
 
**''Note: You want to make sure this bar is always equal to or fuller than the ore bar!''
 
**''Note: You want to make sure this bar is always equal to or fuller than the ore bar!''
 
*Output: How much liquid metal is ready to be removed from the Blast Furnace.
 
*Output: How much liquid metal is ready to be removed from the Blast Furnace.
 +
*Tuyere Slot: This is where to put the Tuyere.
  
−
In addition, there is also a slot in the top right corner that will hold a Tuyere.  A Tuyere must be used in order for a [[Bellows]] to work properly with the Blast Furnace. '''Note:''' ''If there is no tuyere in the blast furnace, the bellows will not be able to make the blast furnace hot enough to smelt the ore. The tuyere is REQUIRED in order to actually get anything out of the blast furnace. Without a tuyere, the blast furnace will never reach completion.''
+
''Note: The Tuyere is required in order to get anything out of the blast furnace. Without a Tuyere, the blast furnace will never reach completion.''
−
 
 
−
[http://en.wikipedia.org/wiki/Tuyere ''A tuyere, also can be spelled as tuyère, is a tube, nozzle or pipe through which air is blown into a furnace or hearth.'']
 
  
 
===Smelting Ores===
 
===Smelting Ores===
  
−
''Note: The Blast Furnace can only be used to smelt Iron [[Ore]]s. If you wish to smelt large quantities of other ores, you will need to use a [[Crucible]].''
+
''Note: The Blast Furnace can only be used to smelt Iron Ores. If you wish to smelt large quantities of other ores, you will need to use a [[Crucible]].''
−
{{InfoTable/IronOre}}
 
  
 
To smelt iron ore in a Blast Furnace, throw iron ore into the top of the Blast Furnace, along with an equal amount of [[Flux]] and an equal or greater amount of [[Charcoal]] '''''all at the same time.''''' Each layer of the blast furnace can process up to four pieces of ore. Right click the Blast Furnace Block with a [[Firestarter]] or [[Flint & Steel]] to light it. To keep the temperature high after throwing in the initial lighting piece of charcoal, it is recommended to keep a 1:1 ratio of charcoal to ore, or higher. If there is more ore than charcoal, the temperature will begin to drop.
 
To smelt iron ore in a Blast Furnace, throw iron ore into the top of the Blast Furnace, along with an equal amount of [[Flux]] and an equal or greater amount of [[Charcoal]] '''''all at the same time.''''' Each layer of the blast furnace can process up to four pieces of ore. Right click the Blast Furnace Block with a [[Firestarter]] or [[Flint & Steel]] to light it. To keep the temperature high after throwing in the initial lighting piece of charcoal, it is recommended to keep a 1:1 ratio of charcoal to ore, or higher. If there is more ore than charcoal, the temperature will begin to drop.
  
−
With a tuyere in the top-right slot of the Blast Furnace's GUI, work a bellows placed adjacent-to and facing the Blast Furnace to reach a sufficient temperature to smelt the ore.
+
With a Tuyere in the top-right slot of the Blast Furnace's GUI, work a bellows placed adjacent-to and facing the Blast Furnace to reach a sufficient temperature to smelt the ore.
  
 
If the ratio of charcoal to ore is at least 1:1 and the temperature is kept high enough with the use of a bellows, the ore will begin to melt. The ore counter will eventually deplete, filling the output counter with the resulting metal.   
 
If the ratio of charcoal to ore is at least 1:1 and the temperature is kept high enough with the use of a bellows, the ore will begin to melt. The ore counter will eventually deplete, filling the output counter with the resulting metal.   
  
−
Once the ore is smelted, the tuyere will take damage, and you will need to place a [[Crucible]] beneath the Blast Furnace block to catch the liquid pig iron.
+
Once the ore is smelted, the Tuyere will take damage, and you will need to place a [[Crucible]] beneath the Blast Furnace block to catch the liquid pig iron.

Latest revision as of 18:50, 23 November 2020

Blast Furnace
Blast Furnace.png
Blast Furnace.png
Tool

Steel Pickaxe.png

Stacksize

32

Size ⇲

Small

Weight ⚖

Light

Renewable

No

Ore Dictionary

None

Drops

Self

Extra Item Data

See Data


Overview

The Blast Furnace is used to smelt Iron Ore into liquid Pig Iron. Pig Iron ingots are worked into Steel.

Obtaining

Blast Furnace Shopping List

Minimum Size:

For Each Additional Layer:

  • 4 Fire Bricks
  • 12 Wrought Iron Sheets
A minimum blast furnace construction

Crafting Requirements

  • Craft the Blast Furnace block out of eight Wrought Iron Double Sheets and a Crucible.
  • Work a Tuyere out of a Double Sheet.

Construction

The height of the blast furnace’s chimney determines how much Ore, Flux and Charcoal it can hold, and thus the maximum amount of ore which can be smelted at one time. Each layer of chimney holds four of each item. The maximum height is five layers of chimney, holding 20 ore, 20 flux, and 20 charcoal.

  1. Place the Crucible on the ground
  2. Place the Blast Furnace Block on top of the Crucible
  3. Place a Bellows such that it will blow into the Blast Furnace Block.
  4. Form the Chimney out of Fire Bricks starting the block above the Blast Furnace Block.
  5. Rmb.png Right Clickto place 12 Wrought Iron Sheets on each horizontal, outward-facing side of the Blast Furnace.
  6. Place the Tuyere inside the Blast Furnace GUI.
  7. Add additional layers as wanted.

Usage

The finalized Blast Furnace fills when charcoal, flux and ore is dropped into the chimney. Right click the blast furnace block with a Firestarter or a Flint & Steel to activate it. The front of the blast furnace block and the top of the chimney should both start to glow.

GUI

The Blast Furnace GUI can be opened by right clicking the Blast Furnace block.

Blast Furnace GUI.png

  • Temperature Gauge: This shows the current temperature of the Blast Furnace. The temperature can be raised by adding more coal or by attaching a bellows to either side of the Blast Furnace and pumping it.
  • Ore: How much unmelted ore is present in the Blast Furnace.
  • Charcoal: How much charcoal is present in the Blast Furnace. Regular coal cannot be used in the Blast Furnace, only charcoal.
    • Note: You want to make sure this bar is always equal to or fuller than the ore bar!
  • Output: How much liquid metal is ready to be removed from the Blast Furnace.
  • Tuyere Slot: This is where to put the Tuyere.

Note: The Tuyere is required in order to get anything out of the blast furnace. Without a Tuyere, the blast furnace will never reach completion.

Smelting Ores

Note: The Blast Furnace can only be used to smelt Iron Ores. If you wish to smelt large quantities of other ores, you will need to use a Crucible.

To smelt iron ore in a Blast Furnace, throw iron ore into the top of the Blast Furnace, along with an equal amount of Flux and an equal or greater amount of Charcoal all at the same time. Each layer of the blast furnace can process up to four pieces of ore. Right click the Blast Furnace Block with a Firestarter or Flint & Steel to light it. To keep the temperature high after throwing in the initial lighting piece of charcoal, it is recommended to keep a 1:1 ratio of charcoal to ore, or higher. If there is more ore than charcoal, the temperature will begin to drop.

With a Tuyere in the top-right slot of the Blast Furnace's GUI, work a bellows placed adjacent-to and facing the Blast Furnace to reach a sufficient temperature to smelt the ore.

If the ratio of charcoal to ore is at least 1:1 and the temperature is kept high enough with the use of a bellows, the ore will begin to melt. The ore counter will eventually deplete, filling the output counter with the resulting metal.

Once the ore is smelted, the Tuyere will take damage, and you will need to place a Crucible beneath the Blast Furnace block to catch the liquid pig iron.

Retrieved from "https://tng.terrafirmacraft.com/index.php?title=Blast_Furnace&oldid=3055"